Package Details: xen 4.19.1pre-1

Git Clone URL: https://aur.archlinux.org/xen.git (read-only, click to copy)
Package Base: xen
Description: Open-source type-1 or baremetal hypervisor
Upstream URL: https://xenproject.org/
Keywords: hypervisor virtualization xen
Licenses: GPL2
Submitter: sergej
Maintainer: Refutationalist
Last Packager: Refutationalist
Votes: 185
Popularity: 0.68
First Submitted: 2009-11-09 11:22 (UTC)
Last Updated: 2024-09-20 00:31 (UTC)

Dependencies (63)

Sources (7)

Pinned Comments

Refutationalist commented on 2024-05-22 22:08 (UTC) (edited on 2024-05-23 00:07 (UTC) by Refutationalist)

As of now (2024-22-05) Xen with stubdom doesn't build because of a problem in the imported code. Been this way for about two weeks. Anyone else seeing this behavior?

Also, there is a lot of work happening on Xen in my development repo, thanks to @Serus. Check it out at: https://github.com/refutationalist/saur

Latest Comments

« First ‹ Previous 1 .. 19 20 21 22 23 24 25 26 27 28 29 .. 101 Next › Last »

jsteel commented on 2017-06-07 08:17 (UTC)

I think it's an issue with gcc7. I found this patch http://git.ipxe.org/ipxe.git/commitdiff/5f85cbb which gets around the error reported by ArthurBorsboom but then I get a similar error shortly after: [BUILD] bin/ath5k_desc.o drivers/net/ath/ath5k/ath5k_desc.c: In function 'ath5k_hw_setup_2word_tx_desc': drivers/net/ath/ath5k/ath5k_desc.c:106:15: error: this statement may fall through [-Werror=implicit-fallthrough=] frame_type = AR5K_AR5210_TX_DESC_FRAME_TYPE_NO_DELAY; drivers/net/ath/ath5k/ath5k_desc.c:107:3: note: here case AR5K_PKT_TYPE_PIFS: ^~~~

ArthurBorsboom commented on 2017-06-06 09:30 (UTC)

I got a compile error with the latest PKGBUILD (4.8.0-7): drivers/net/igbvf/igbvf_vf.c: In function 'igbvf_promisc_set_vf': drivers/net/igbvf/igbvf_vf.c:359:10: error: this statement may fall through [-Werror=implicit-fallthrough=] msgbuf |= E1000_VF_SET_PROMISC_MULTICAST; drivers/net/igbvf/igbvf_vf.c:360:2: note: here case e1000_promisc_unicast: ^~~~

baratharon commented on 2017-06-03 05:17 (UTC)

I got a compile error with the latest PKGBUILD (4.8.0-7): runtime.c: In function 'efi_compat_get_info': /home/aron/build/xen-4.8.0-7/xen/src/xen-4.8.0/xen/include/asm/x86_64/uaccess.h:58:37: error: '*' in boolean context, suggest '&&' instead [-Werror=int-in-bool-context] compat_access_ok(addr, (count) * (size))) ^ Details: https://pastebin.com/jrb44Mg1

Flubbadub commented on 2017-06-01 09:38 (UTC)

For anyone else using Manjaro (or probably me in the future) the kernels are named differently in Manjaro. I had to apply this patch in order to get the grub menu entried to be generated correctly: diff --git a/etc/grub.d/09_xen b/etc/grub.d/09_xen index 59ac88a..3a41376 --- a/etc/grub.d/09_xen +++ b/etc/grub.d/09_xen @@ -38,11 +38,11 @@ _FUNC_GRUB_FILE_PRESENT() { case "${GRUB_PLATFORM}" in x86) - list="$(for i in "${GRUB_ROOT}"/boot/vmlinuz-linux* ; do + list="$(for i in "${GRUB_ROOT}"/boot/vmlinuz-* ; do if grub_file_is_not_garbage "${i}" && "${grub_file}" ${check} "${i}" ; then echo -n "${i} " ; fi done)" ;; *) - list="$(for i in "${GRUB_ROOT}"/boot/vmlinuz-linux* ; do + list="$(for i in "${GRUB_ROOT}"/boot/vmlinuz-* ; do if grub_file_is_not_garbage "${i}" && "${grub_file}" ${check} "${i}" ; then echo -n "${i} " ; fi done)" ;; esac

Refutationalist commented on 2017-05-31 05:19 (UTC)

I just tried building 4.8.0-7 from a clean install-- I usually do this so I can catch missing dependencies and to control clutter. I got a build failure: https://gist.github.com/anonymous/a8c48f68b086a14407cc0067c222ce00

jsteel commented on 2017-04-04 09:27 (UTC)

Thanks, specifying the seabios file in the PKGBUILD as you suggested worked!

tony_42 commented on 2017-04-03 14:04 (UTC)

@jsteel: I think it's a mistake in the PKGBUILD. It should be: --with-system-seabios=/usr/share/qemu/bios-256k.bin (so with the path to SeaBIOS specified) There should be a path as well for OVMF, but I just realize the package change recently so I don't know if it's going to work with Xen.

jsteel commented on 2017-04-03 12:35 (UTC)

After updating from 4.8.0-4 to 4.8.0-5 I installed seabios but I get an error when booting a domU: libxl: error: libxl_dom.c:892:libxl__load_hvm_firmware_module: failed to read BIOS file: No such file or directory I've gone back to 4.8.0-4 for now. Any idea what else is needed apart from installing seabios for non-UEFI systems now? Thanks.

jonnyt886 commented on 2017-04-03 09:09 (UTC)

Hitting repeated issues building this when downloading ovmf: -> Cloning ovmf git repo... Cloning into bare repository '/tmp/yaourt-tmp-jonny/aur-xen/ovmf'... remote: Counting objects: 240383, done. remote: Compressing objects: 100% (59223/59223), done. remote: Total 240383 (delta 184842), reused 229977 (delta 174449) Receiving objects: 100% (240383/240383), 225.31 MiB | 259.00 KiB/s, done. fatal: unable to open /tmp/yaourt-tmp-jonny/aur-xen/ovmf/objects/pack/tmp_pack_0lHJ2u: No such file or directory fatal: index-pack failed ==> ERROR: Failure while downloading ovmf git repo Aborting... ==> ERROR: Makepkg was unable to build xen. ==> Restart building xen ? [y/N] ==> ---------------------------- Tried removing ovmf from the PKGBUILD (removed all lines referring to ovmf except for the 'optDepends' entry) and then checksum validations fail, but with no file mentioned. And yes I did remove all the ovmf entries! Is anyone else getting this?

<deleted-account> commented on 2017-03-28 06:46 (UTC)

Bumped to 4.8.0-5. This version adds XSA-211, splits out SeaBIOS and OVMF and disables Werror (hopefully).

« First ‹ Previous 1 .. 19 20 21 22 23 24 25 26 27 28 29 .. 101 Next › Last »