Package Details: brscan4 0.4.11_1-2

Git Clone URL: https://aur.archlinux.org/brscan4.git (read-only, click to copy)
Package Base: brscan4
Description: SANE drivers from Brother for compatible models
Upstream URL: http://support.brother.com
Keywords: scanner
Licenses: GPL, custom:brother
Submitter: Harvey
Maintainer: Harvey
Last Packager: Harvey
Votes: 164
Popularity: 0.065515
First Submitted: 2011-08-01 08:43 (UTC)
Last Updated: 2023-03-06 12:56 (UTC)

Dependencies (2)

Required by (66)

Sources (3)

Latest Comments

« First ‹ Previous 1 2 3 4 5 6 7 8 .. 24 Next › Last »

Harvey commented on 2024-02-08 17:20 (UTC) (edited on 2024-02-08 17:22 (UTC) by Harvey)

Are you doing this from different machines?

brikler commented on 2024-02-08 16:22 (UTC) (edited on 2024-02-08 16:22 (UTC) by brikler)

@harvey thank you for this quick respond :) unfortunately this is not the reason because i set this bevor and brsaneconfig4 -d can ping the scanner. 

scanimage -L
device `brother4:net1;dev0' is a Brother scanner DCP-L2510D
-----------------------------
-----------------------------
ping
test scanner
ping 192.168.2.1 -w 10

PING 192.168.2.1 (192.168.2.1) 56(84) bytes of data.
64 bytes from 192.168.2.1: icmp_seq=1 ttl=64 time=3.53 ms
64 bytes from 192.168.2.1: icmp_seq=2 ttl=64 time=3.86 ms
64 bytes from 192.168.2.1: icmp_seq=3 ttl=64 time=3.67 ms
64 bytes from 192.168.2.1: icmp_seq=4 ttl=64 time=3.76 ms
64 bytes from 192.168.2.1: icmp_seq=5 ttl=64 time=3.84 ms
64 bytes from 192.168.2.1: icmp_seq=6 ttl=64 time=3.72 ms
64 bytes from 192.168.2.1: icmp_seq=7 ttl=64 time=4.91 ms
64 bytes from 192.168.2.1: icmp_seq=8 ttl=64 time=4.40 ms
64 bytes from 192.168.2.1: icmp_seq=9 ttl=64 time=3.92 ms
64 bytes from 192.168.2.1: icmp_seq=10 ttl=64 time=3.73 ms

--- 192.168.2.1 ping statistics ---
10 packets transmitted, 10 received, 0% packet loss, time 9014ms
rtt min/avg/max/mdev = 3.532/3.933/4.912/0.392 ms

Harvey commented on 2024-02-08 15:02 (UTC) (edited on 2024-02-08 15:07 (UTC) by Harvey)

Please, please, read and follow the post installation notes that are displayed after installation: For a network installation run the following as root: brsaneconfig4 -a name="Brother" model="YOURMODELHERE" ip=YOUR.SCANNER.IP.HERE

brikler commented on 2024-02-08 13:22 (UTC) (edited on 2024-02-08 13:28 (UTC) by brikler)

hi there :)

it works with usb cabel, but i can't scan via network the scanner where found:

tom@donar ~ # scanimage -L
device `brother4:net1;dev0' is a Brother scanner DCP-L2510D

but it wont scan

tom@donar ~ # scanimage --format=tiff --output-file test.tiff --progress
scanimage: open of device brother4:net1;dev0 failed: Invalid argument

i searched the web for a solution, but i wasn't able to found one :(

Harvey commented on 2024-01-15 13:47 (UTC)

I'd say no, because of different CPU architecture. Maybe someone else has more insight.

eliby commented on 2024-01-15 13:18 (UTC)

Thank you very much. Works on dcp-1610w. Is there any way I can make this driver work on a raspberry pi?

beschu commented on 2023-11-05 21:23 (UTC)

Works fine with Brother DCP-7055W connected through Wi-Fi. Thank you!

azea commented on 2023-08-21 23:43 (UTC) (edited on 2023-08-21 23:43 (UTC) by azea)

Works perfectly on my mfc-l2750dw

brscan5 didn't detect it.

lenok commented on 2023-08-01 19:49 (UTC)

Not in the list but works, brother-mfc-j5320dw

« First ‹ Previous 1 2 3 4 5 6 7 8 .. 24 Next › Last »