Arch Linux User Repository

All my packages are managed at GitHub where you can also contribute directly: https://github.com/Martchus/PKGBUILDs
There also exist a binary repository: https://wiki.archlinux.org/index.php/Unofficial_user_repositories#ownstuff

Important remarks:

• The packages within the binary repository are built against the latest packages from Arch Linux and hence might not be compatible with Manjaro. This can be the cause when the Plasmoid doesn't work.
• Like with any other package a rebuild is required when the soname of a dependency like boost changes (see e.g. https://github.com/Martchus/syncthingtray/issues/98). The package in my binary repository should be rebuilt in a timely manner. I'm also sometimes updating pkgrel of the AUR package when a rebuild is required (only in accordance with Arch Linux of course, not in accordance with Manjaro).
  • The "dirty" way is forcing the installation/update (leaving syncthingtray broken until it has been rebuilt) or to uninstall syncthingtray temporarily before the update. After the update syncthingtray can be rebuilt and reinstalled again.
  • The correct solution is to use makechrootpkg which is also how official developers build their packages (and how packages in my binary repository are built).
• It is required to build dependencies (that are not provided by Arch Linux itself) before building this package. So you need to build c++utilities, qtutilities, qtforkawesome and syncthingtray in that order.
• The KDE integrations have been ported to KDE 6 but building them for KDE 5 should still work. This package does not build any KDE integrations by default because KDE 6 is now in the main repositories. To build KDE integrations for KDE 6 you need to install syncthingtray-qt6 instead of this package.
• Note that the tests of this package might fail despite there's nothing wrong (e. g. because Syncthing is just too slow and the test runs in a timeout). To ignore those false-positives, build the package with makepkg --nocheck or makechrootpkg -- --nocheck. It makes still sense to report failures. But please include the actual error message and not just the last few lines.

I also deleted my comment because it is not very useful without the errors.

So here again: I doubt this has anything to do with this package beside the fact that it is using qt5-webengine which pulls the ffmpeg package which pulls dav1d. It looks like your ffmpeg and dav1d versions aren't matching. Are you using a custom ffmpeg build and missed https://www.archlinux.org/todo/dav1d-060-soname-bump/ ?

@Marchus The post on the tageditor was an accident, which is why I deleted it. I think I followed a link from this page, which is why I accidentally posted it there.

Looks like the exact same error as you've got with tageditor. See my comment there. It has likely nothing to do with any of these packages.

I got this error during the build phase today:

/usr/bin/ld: warning: libdav1d.so.3, needed by /usr/lib/libavcodec.so.58, not found (try using -rpath or -rpath-link)

/usr/bin/ld: /usr/lib/libavcodec.so.58: undefined reference to `dav1d_get_picture'

/usr/bin/ld: /usr/lib/libavcodec.so.58: undefined reference to `dav1d_version'

/usr/bin/ld: /usr/lib/libavcodec.so.58: undefined reference to `dav1d_data_unref'

/usr/bin/ld: /usr/lib/libavcodec.so.58: undefined reference to `dav1d_open'

/usr/bin/ld: /usr/lib/libavcodec.so.58: undefined reference to `dav1d_data_wrap'

/usr/bin/ld: /usr/lib/libavcodec.so.58: undefined reference to `dav1d_send_data'

/usr/bin/ld: /usr/lib/libavcodec.so.58: undefined reference to `dav1d_flush'

/usr/bin/ld: /usr/lib/libavcodec.so.58: undefined reference to `dav1d_picture_unref'

/usr/bin/ld: /usr/lib/libavcodec.so.58: undefined reference to `dav1d_close'

/usr/bin/ld: /usr/lib/libavcodec.so.58: undefined reference to `dav1d_default_settings'

collect2: error: ld returned 1 exit status

make[2]: *** [tray/CMakeFiles/syncthingtray.dir/build.make:428: tray/syncthingtray] Error 1

make[2]: Leaving directory '/home/tydynrain/.cache/aurutils/sync/syncthingtray/src/syncthingtray-0.10.7'

make[1]: *** [CMakeFiles/Makefile2:1549: tray/CMakeFiles/syncthingtray.dir/all]

Error 2

make[1]: Leaving directory '/home/tydynrain/.cache/aurutils/sync/syncthingtray/src/syncthingtray-0.10.7'

make: *** [Makefile:158: all] Error 2

==> ERROR: A failure occurred in build().

Aborting...

see https://aur.archlinux.org/packages/tageditor/#comment-727871

Hey, validity check fails during update:

==> Validating source files with sha256sums...
    syncthingtray-0.10.6.tar.gz ... FAILED
==> ERROR: One or more files did not pass the validity check!
Error downloading sources: syncthingtray

I can not reproduce it myself so I guess I'll better just make the package skip the tests by default.

I get the same error and failure during build for version 0.10.1 (the --nocheck flag worked):

2: !!!FAILURES!!!

2: Test Results:

2: Run: 1 Failures: 1 Errors: 0

2:

2:

2: 1) test: ApplicationTests::test (F) line: 146 /home/tydynrain/.cache/yay/syncthingtray/src/syncthingtray-0.10.1/cli/tests/application.cpp

2: forced failure

2: - Line - .* could not be found in output.

2:

2:

2: Tests failed

2/2 Test #2: syncthingctl_run_tests ...........***Failed 6.84 sec

50% tests passed, 1 tests failed out of 2

Total Test time (real) = 21.18 sec

The following tests FAILED:

  2 - syncthingctl_run_tests (Failed)

Errors while running CTest

make[3]: *** [connector/CMakeFiles/check.dir/build.make:57: connector/CMakeFiles/check] Error 8

make[2]: *** [CMakeFiles/Makefile2:416: connector/CMakeFiles/check.dir/all] Error 2

make[1]: *** [CMakeFiles/Makefile2:423: connector/CMakeFiles/check.dir/rule] Error 2

make: *** [Makefile:305: check] Error 2

==> ERROR: A failure occurred in check().

Aborting...

Error making: syncthingtray

@Martchus the --nocheck did it for me. And sorry for not posting the full error. This is what I was getting... but I still don't see anything specific other than the second check failing due to a timeout.

test 2
    Start 2: syncthingctl_run_tests

2: Test command: /tmp/syncthingtray/src/syncthingtray-0.8.1/cli/syncthingctl_tests "-p" "/tmp/syncthingtray/src/syncthingtray-0.8.1/cli/testfiles" "-w" "/tmp/syncthingtray/src/syncthingtray-0.8.1/cli/testworkingdir" "-a" "/tmp/syncthingtray/src/syncthingtray-0.8.1/cli/syncthingctl"
2: Test timeout computed to be: 10000000
2: Directories used to search for testfiles:
2: /tmp/syncthingtray/src/syncthingtray-0.8.1/cli/testfiles/
2: ./testfiles/
2: 
2: Directory used to store working copies:
2: /tmp/syncthingtray/src/syncthingtray-0.8.1/cli/testworkingdir/
2: 
2: Executing test cases ...
2: .
2:  - Setup configuration for Syncthing tests ...
2: 
2:  - Launching Syncthing ...
2: 
2: Waiting till Syncthing GUI becomes available ...- syncthingctl status --api-key syncthingtestinstance --url http://localhost:59251
2: Directories
2:  - test2
2:    Label                         Test dir 2
2:    Path                          /tmp/some/path/2/
2:    Status                        paused
2:       Global                        0 file(s), 0 dir(s), 0 bytes
2:       Local                         0 file(s), 0 dir(s), 0 bytes
2:    Shared with                   Test dev 2
2:    Type                          Send & Receive
2:    Ignore permissions            no
2:    Auto-normalize                yes
2:    Rescan interval               365 d
2: 
2:  - test1
2:    Path                          /tmp/some/path/1/
2:    Status                        idle
2:       Global                        0 file(s), 0 dir(s), 0 bytes
2:       Local                         0 file(s), 0 dir(s), 0 bytes
2:    Last scan time                2018-06-11 09:16:42
2:    Shared with                   Test dev 2
2:                                  Test dev 1
2:    Type                          Send & Receive
2:    Ignore permissions            no
2:    Auto-normalize                yes
2:    Rescan interval               2 h
2: 
2: Devices
2:  - Desktop-Arch
2:    ID                            [removed]
2:    Status                        own device
2:    Addresses                     dynamic
2:    Compression                   metadata
2: 
2:  - Test dev 1
2:    ID                            [removed]
2:    Status                        disconnected
2:    Addresses                     dynamic
2:    Compression                   metadata
2: 
2:  - Test dev 2
2:    ID                            [removed]
2:    Status                        paused
2:    Addresses                     tcp://192.168.2.2:22000
2:    Compression                   metadata
2: 
2: expected status: Directories
2:  - test2
2:    Label                         Test dir 2
2:    Path                          /tmp/some/path/2/
2:    Status                        paused
2:       Global                        0 file\(s\), 0 dir\(s\), 0 bytes
2:       Local                         0 file\(s\), 0 dir\(s\), 0 bytes
2:    Shared with                   Test dev 2
2:    Type                          Send & Receive
2:    Ignore permissions            no
2:    Auto-normalize                yes
2:    Rescan interval               365 d
2: 
2:  - test1
2:    Path                          /tmp/some/path/1/
2:    Status                        (idle|scanning)
2:       Global                        0 file\(s\), 0 dir\(s\), 0 bytes
2:       Local                         0 file\(s\), 0 dir\(s\), 0 bytes
2:    Last scan time                \d\d\d\d-\d\d-\d\d \d\d:\d\d:\d\d.*
2:    Shared with                   Test dev 2
2:                                  Test dev 1
2:    Type                          Send & Receive
2:    Ignore permissions            no
2:    Auto-normalize                yes
2:    Rescan interval               2 h
2: 
2: Devices
2:  - Test dev 1
2:    ID                            [removed]
2:    Status                        disconnected
2:    Addresses                     dynamic
2:    Compression                   metadata
2: 
2:  - Test dev 2
2:    ID                            [removed]
2:    Status                        paused
2:    Addresses                     tcp://.*22000
2:    Compression                   metadata
2: 
2:  - .*
2:    ID                            \w\w\w\w\w\w\w-\w\w\w\w\w\w\w-\w\w\w\w\w\w\w-\w\w\w\w\w\w\w-\w\w\w\w\w\w\w-\w\w\w\w\w\w\w-\w\w\w\w\w\w\w-\w\w\w\w\w\w\w
2:    Status                        own device
2:    Addresses                     dynamic
2:    Compression                   metadata
2: 
2: F
2:  - Waiting for Syncthing to terminate ...
2: 
2:  - Syncthing terminated with exit code 0.
2: 
2:  - Syncthing stdout during the testrun:
2: [monitor] 09:16:42 INFO: Signal 15 received; exiting
2: 
2: 
2: 
2: !!!FAILURES!!!
2: Test Results:
2: Run:  1   Failures: 1   Errors: 0
2: 
2: 
2: 1) test: ApplicationTests::test (F) line: 120 /tmp/syncthingtray/src/syncthingtray-0.8.1/cli/tests/application.cpp
2: forced failure
2: - Actual status does not match expected status.
2: 
2: 
2/2 Test #2: syncthingctl_run_tests ...........***Failed    2.26 sec